9-7X L6-4.2L (2008)
25. Install the power steering return hose and the power steering cooler hose to the power steering cooler as shown.
26. Connect the power steering hose assembly to the power steering gear.
27. Install the power steering hose assembly to power steering gear retaining bolt.
Tighten the bolt to 12 Nm (106 in. lbs.).
28. Remove the drain pan from under the vehicle.
29. Install the engine protection shield. Refer to Engine Protection Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and
Repair/Engine Protection Shield Replacement).
30. Lower the vehicle.
31. Bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power Steering/Power
Steering Bleeding/Service and Repair).
