9-7X L6-4.2L (2008)
Air Filter Element: Service and Repair
Air Cleaner Element Replacement
Removal Procedure
1. Remove the radiator support diagonal brace if applicable. Refer to Radiator Support Diagonal Brace Replacement (See: Body and Frame/Radiator
Support/Service and Repair).
2. Disconnect the secondary air injection (AIR) reaction pump inlet hose from the air cleaner air outlet duct.
3. Loosen the 3 air cleaner housing retaining screws (1).
4. Remove the air cleaner housing (2).
5. Lift the air cleaner element (6) and air outlet duct (3) from the lower air cleaner housing/washer solvent tank assembly (4).
6. Remove the air cleaner element (6) from the air outlet duct (3) with a twisting and pulling motion.
7. Inspect the entire assembly for dust, debris, or water. Clean or replace as necessary.
Installation Procedure