9-7X L6-4.2L (2008)
Do not pry on the fuel injectors or the fuel injector rail when adjusting the bracket. Refer to callout # 1 in the fuel rail illustration as a rotating point to
adjust the bracket using two pairs of pliers.
To avoid the possibility of the injector rail bracket tab contacting the cylinder head and causing a noise or vibration issue adjust the bracket tab to an
angle similar to the one shown in the illustration above (1). Use two pairs of pliers and carefully rotate the bracket tab upwards.
Parts Information
Warranty Information (excluding Saab U.S. Models)
For vehicles repaired under warranty use the table.
Warranty Information (Saab U.S. Models)
For vehicles repaired under warranty, use the table.