9-7X L6-4.2L (2008)
Transfer Case Actuator: Service and Repair
Transfer Case Motor/Encoder Replacement
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the fuel tank shield, if equipped. Refer to Fuel Tank Shield Replacement (See: Fuel Delivery and Air Induction/Fuel Tank/Fuel Tank
Shield/Service and Repair).
3. Disconnect the motor/encoder electrical connector (1).
4. Remove the motor/encoder mounting bolts.
5. Remove the motor/encoder assembly.