9-7X L6-4.2L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
4. Install the bolts that retain the ECU (1) to the bottom the passenger seat cushion frame.
Tighten the bolts to 2 Nm (18 in. lbs.).
5. Connect the electrical connectors.
6. Install the seat cushion trim cover and pad.
7. Re-zero the inflatable restraint passenger presence system. Refer to Control Module References (See: Testing and Inspection/Programming and
Relearning/Control Module References) for programming and setup information.
