9-7X L6-4.2L (2008)
2. Install the lower ball joint to the lower control arm using J 9519-E, J 41435, and J 45105-2.
3. Remove J 9519-E, J 41435, and J 45105-2 from the lower control arm.
4. Install J 9519-E and J 45105-1 to the lower ball joint.
5. Flare the lower ball joint flange using J 9519-E and J 45105-1.
6. Remove J 9519-E and J 45105-1 from the lower ball joint.
7. Install the steering knuckle with wheel hub and bearing attached. Refer to Steering Knuckle Replacement (RWD) (See: Front Steering
Knuckle/Service and Repair/Steering Knuckle Replacement (RWD))Steering Knuckle Replacement (4WD) (See: Front Steering Knuckle/Service
and Repair/Steering Knuckle Replacement (4WD)).
8. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
9. Lower the vehicle.
10. Check the front wheel alignment. Refer to Wheel Alignment Specifications (See: Alignment/Specifications/Wheel Alignment Specifications).