9-7X L6-4.2L (2008)
3. Using the J 21128, install the axle shaft seal.
4. Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.
5. Install the axle shaft. Refer to Rear Axle Shaft Replacement (See: Axle Shaft Assembly/Axle Shaft/Service and Repair).
6. Install the rear axle housing cover and the gasket. Refer to Rear Axle Housing Cover and Gasket Replacement (8.6/9.5 in lD axle) (See:
Differential Assembly/Differential Cover/Service and Repair).
7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
8. Fill the rear axle with axle lubricant. Use the proper fluid. Refer to Rear Axle Lubricant Replacement (8.0/8.6 Inch Axle) (See: Differential
Assembly/Fluid - Differential/Service and Repair/Removal and Replacement/Rear Drive Axle).
9. Lower the vehicle.
