9-7X L6-4.2L (2008)
Seals and Gaskets: Service and Repair
NVG 120-NR9 - Transfer Case
Front Output Shaft Seal Replacement
Front Output Shaft Seal Replacement
Tools Required
J 45236 Output Shaft Seal Installer - Front
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the front propeller shaft. Refer to Front Propeller Shaft Replacement (See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair/Front Propeller Shaft Replacement).
3. Remove the dust shield from the front output shaft.