saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Wipers/Washers - Delayed Windshield Washer Spray|Page 14111 > < Windshield Upper Reveal Molding Replacement|Page 14101
Page 1
background image

Check Valve: Customer Interest
Wipers/Washers - Delayed Windshield Washer Spray

Bulletin No.: 06-08-43-002B

Date: June 29, 2007

TECHNICAL

Subject:
Delayed Front Windshield Washer Fluid Spray (Install Windshield Washer Check Valve)

Models:
2006-2007 Buick Rainier
2006-2008 Chevrolet TrailBlazer Models
2006-2008 GMC Envoy Models
2006-2008 Saab 9-7X

Supercede:

This bulletin is being revised to add the Saab 9-7X model and Saab Warranty Information. Please discard Corporate Bulletin Number 06-08-43-002A
(Section 08 - Body and Accessories).

Condition

Some customers may comment on a delayed windshield washer fluid spray with the wipers going through a few cycles before liquid is squirted through
the washer nozzles.

Cause

The windshield washer pump may lose pump prime when the washer fluid level is approximately 1/3 or less in the windshield washer container.

Correction

Technicians are to install a windshield washer check valve in place of the barbed fitting at the front windshield washer hose following the steps below:

Open the hood.

Locate the front windshield washer hose at the plastic barbed fitting (1) by the radiator surge tank along the right front fender.

Remove the front windshield washer hose from the radiator surge tank retainer.

Wipers/Washers - Delayed Windshield Washer Spray|Page 14111 > < Windshield Upper Reveal Molding Replacement|Page 14101