9-7X V8-5.3L (2005)
Rear Bumper Cover / Fascia: Service and Repair
Rear Bumper Fascia Replacement
Rear Bumper Fascia Replacement
Removal Procedure
1. Open the liftgate.
2. Remove the bolts from the upper inside edge of the fascia.
3. Raise and support the vehicle to a suitable height. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair
).
4. Remove the screws from the rear fascia lower extension.
5. Remove the lower extension from the fascia.
Pull forward to release the extension retainers from the fascia locators.
6. Remove the lower fascia push-pins.