9-7X V8-5.3L (2005)
Trunk / Liftgate Striker: Service and Repair
Liftgate Lock Striker Replacement
Liftgate Lock Striker Replacement
Removal Procedure
1. Open the liftgate.
2. Using a grease pencil, mark the position of the liftgate striker to the body.
3. Remove the bolts that retain the liftgate striker to the body.
4. Remove the striker from the body.
Installation Procedure
1. Install the striker to the body and position as previously marked.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the bolts that retain the striker to the body.
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Adjust the striker, if necessary.
4. Close the liftgate.
