9-7X V8-5.3L (2005)
Skid Plate: Service and Repair
Radiator Support Shield Replacement
Radiator Support Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the radiator support shield mounting nuts and bolts.
3. Remove the radiator support shield.
Installation Procedure
1. Install the radiator support shield.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the radiator support shield mounting nuts and bolts.
Tighten the radiator support shield mounting nuts to 20 Nm (15 ft. lbs.).
3. Lower the vehicle.
