saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Interior - Cup Holder Broken/Inoperative/Won't Deploy|Page 17420 > < Interior - Cup Holder Broken/Inoperative/Won't Deploy|Page 17418
Page 3
background image

Verify that the Driver Information Center buttons are properly retained. The two retaining fingers near the air duct can dislodge if the IP panel is
distorted during removal. Confirm retention of the buttons.

Reinstall the IP trim plate by lining up the A/C ducts and slowly, but firmly, seat the retaining clips.

Deploy the cupholder to ensure that it aligns properly with the slot in the IP trim plate.

If the cupholder is not aligned with the IP trim plate, repeat the above steps.

Parts Information

Warranty Information (excluding Saab U.S. Models) 

For vehicles repaired under warranty, use the table.

Warranty Information (Saab U.S. Models) 

For vehicles repaired under warranty, use the table.

Disclaimer

Interior - Cup Holder Broken/Inoperative/Won't Deploy|Page 17420 > < Interior - Cup Holder Broken/Inoperative/Won't Deploy|Page 17418