9-7X V8-5.3L (2005)
9. Inspect the camshaft sensor O-ring seal. If the O-ring seal is not cut or damaged, it may be reused.
10. Lubricate the O-ring seal with clean engine oil.
11. Install the camshaft sensor and bolt.
Tighten the bolt to 25 Nm (18 ft. lbs.).
12. Install the valve lifters. Refer to Valve Lifter Replacement (See: Lifter / Lash Adjuster/Service and Repair/Valve Lifter Replacement).
13. Install the condenser. Refer to Condenser Replacement.
