9-7X V8-5.3L (2005)
11. Tighten the engine mount nuts.
Tighten the nuts to 50 Nm (37 ft. lbs.).
12. Install the shock module. Refer to Shock Absorber and Spring Assembly Replacement (See: Steering and Suspension/Suspension/Suspension Strut
/ Shock Absorber/Service and Repair/Front Suspension/Shock Absorber and Spring Assembly Replacement).
13. Install the engine protection shield. Refer to Engine Protection Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and
Repair/Engine Protection Shield Replacement).
14. Install the front tire and wheels. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
15. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
