9-7X V8-5.3L (2005)
1. Apply sealant to the threads of the oil pressure sensor. Refer to Sealers, Adhesives, and Lubricants (See: Specifications/Mechanical
Specifications/Sealers, Adhesives, and Lubricants) for the correct part number.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Using J 41712 or equivalent, install the oil pressure sensor.
Tighten the sensor to 20 Nm (15 ft. lbs.).
3. Connect the oil pressure sensor electrical connector (1).
4. Install the intake manifold. Refer to Intake Manifold Replacement (5.3L) (See: Intake Manifold/Service and Repair/Intake Manifold Replacement
).
