9-7X V8-5.3L (2005)
9. Inspect the sprockets for proper alignment. The mark on the camshaft sprocket (1) should be located in the 6 o'clock position and the mark on the
crankshaft sprocket (2) should be located in the 12 o'clock position.
10. Remove the EN 46330.
Important: Do not apply threadlock to the flex plate bolts at this time.
11. Temporarily install the automatic transmission flex plate or manual transmission flywheel and bolts. Refer to Engine Flywheel Installation (5.3L) (
See: Service and Repair/Overhaul/Assembly/Engine Flywheel Installation (5.3L))Engine Flywheel Installation (6.0L) ().
