9-7X V8-5.3L (2005)
1. Install the water pump and NEW gaskets.
2. Install the water pump bolts.
*
On the initial pass, tighten the bolts to 15 Nm (11 ft. lbs.).
*
On the final pass, tighten the bolts to 30 Nm (22 ft. lbs.).
3. Install the auxiliary heater inlet and outlet hose/pipe nut.
Tighten the nut to 10 Nm (89 in. lbs.).
4. Install the hose to the throttle body.
5. Using J 38185, position the throttle body hose clamp at the throttle body.
6. Install the inlet and outlet hoses/pipes to the water pump.
7. Using J 38185, position the auxiliary heater inlet and outlet hose/pipe clamps at the water pump.
8. Install the outlet hose to the water pump.
