9-7X V8-5.3L (2005)
1. Install two NEW U-clips in the slots (1 and 2) in the spare tire crossmember. Seat the clips into position.
2. Install the adjustable exhaust hanger bracket assembly (3) onto the muffler hanger rod with the two bolts (4) and hand tighten.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Position the adjustable exhaust hanger bracket assembly (3) so that the exhaust tip is centered with at least 25 mm of clearance to the rear fascia
opening.
Tighten the exhaust hanger bracket bolts to 22Nm [16 ft. lbs.].
