9-7X V8-5.3L (2005)
4. Install the power steering hose assembly (1) to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
5. Install the power steering hose assembly rear bracket (2) mounting bolt.
Tighten the bolt to 10 Nm (89 in. lbs.).
6. Install the power steering pressure hose retaining clip.
7. Install the power steering hose assembly front bracket mounting bolt (3).
8. Install the power steering cooler hose (3) to the power steering pump (2).
Notice: Refer to Component Fastener Tightening Notice (See: Service Precautions/Vehicle Damage Warnings/Component Fastener Tightening
Notice).
9. Connect the power steering pressure (1) to the power steering pump (2).
Tighten the power steering pressure hose fitting to 25 Nm (18 in. lbs.).
10. Install the ECM to the ECM mounting bracket. Refer to Engine Control Module Replacement (See: Powertrain Management/Computers and
Control Systems/Engine Control Module/Service and Repair).
11. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair).
