9-7X V8-5.3L (2005)
Canister Purge Solenoid: Service and Repair
Evaporative Emission Canister Purge Solenoid Valve Replacement
Removal Procedure
1. Disconnect the EVAP pipes (1 and 2) from the EVAP purge solenoid. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Delivery
and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
2. Disconnect the EVAP purge solenoid electrical connector.
3. Remove the EVAP purge solenoid (1) from the fuel rail.
Installation Procedure
