9-7X V8-5.3L (2005)
6. Connect the throttle actuator motor electrical connector (1) to the throttle actuator motor (2).
7. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair).
8. Refill the cooling system. Refer to Cooling System Draining and Filling (LL8) (See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair/Cooling System Draining and Filling)Cooling System Draining and Filling (LH6) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair/Cooling System Draining and Filling).
9. Verify that the vehicle meets the following conditions:
*
The vehicle is not in a reduced engine power mode.
*
The ignition is ON.
*
The engine is OFF.
10. Connect a scan tool in order to test for a proper throttle-opening and throttle-closing range.
11. Operate the accelerator pedal and monitor the throttle angles. The accelerator pedal should operate freely, without binding, between a closed
throttle, and a wide open throttle (WOT).
12. Start the engine.
13. Inspect for coolant leaks.
