9-7X V8-5.3L (2005)
1. Install the MAF/IAT sensor (3) to the air filter element (6).
2. Install the air filter element (6) and MAF/IAT sensor (3) to the lower air cleaner housing/washer solvent tank assembly (4).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
Important: Ensure the air inlet duct (5) is properly positioned in the lower air cleaner housing/washer solvent tank assembly (4) before
installing the air cleaner cover (2).
3. Install the air cleaner cover (2) and secure with 4 retaining screws (1).
Tighten the screws to 4 Nm (35 in. lbs.).
4. Install the radiator support diagonal brace. Refer to Radiator Support Diagonal Brace Replacement (See: Body and Frame/Radiator
Support/Service and Repair).
5. Connect the MAF/IAT sensor electrical connector (1).
6. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Air Cleaner Fresh Air Duct/Hose/Service and
Repair).
