9-7X V8-5.3L (2005)
Alarm Module: Service and Repair
Theft Deterrent Exciter Module Replacement
Theft Deterrent Exciter Module Replacement
Removal Procedure
1. Remove the lock cylinder. Refer to Ignition Switch Lock Cylinder Replacement (See: Powertrain Management/Ignition System/Sensors and
Switches - Ignition System/Ignition Switch/Ignition Switch Lock Cylinder/Service and Repair/Removal and Replacement).
2. Use a small flat bladed tool to gently pry outward at the tabs (1, 2) to disengage the exciter module (3) from the key cylinder (4).
3. Remove the theft deterrent exciter module from ignition lock cylinder case assembly.
Installation Procedure
1. Install the theft deterrent exciter module (3) onto the ignition lock cylinder case assembly (4).
2. Install the lock cylinder. Refer to Ignition Switch Lock Cylinder Replacement (See: Powertrain Management/Ignition System/Sensors and
Switches - Ignition System/Ignition Switch/Ignition Switch Lock Cylinder/Service and Repair/Removal and Replacement).