9-7X V8-5.3L (2005)
11. Remove the lower seat belt retractor retaining bolt.
12. Remove the retractor assembly from the seat.
Installation Procedure
1. Position the assembly to the seat.
Notice: Refer to Fastener Notice.
2. Install the lower seat belt retractor retaining bolt.
Tighten the seat belt retractor bolt to 55 Nm (40 ft. lbs.).
3. Connect the seat belt pretensioner electrical connector.
4. Install the push pin (2) on the seat back frame.
5. Install the seat belt into the retractor bracket by guiding the seat belt through the slot in the bracket.
6. Install the seat back panel to the seat back frame. Refer to Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement (See: Body and
Frame/Seats/Seat Back/Service and Repair/Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement).
7. Install the seat back pad and cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (See: Body and Frame/Seats/Seat
Back/Service and Repair/Front Seat Back Cushion Cover and Cushion Pad Replacement).
8. Slide the front seat back seat belt bezel onto the seat belt.
