9-7X V8-5.3L (2005)
6. Install the brake hose bracket to the steering knuckle.
7. Install the brake hose bracket retaining bolts.
Tighten the brake hose bracket retaining bolts to 10 Nm (89 in. lbs.).
8. Install the outer tie rod to the steering knuckle.
9. Install the new outer tie rod retaining nut.
Tighten the outer tie rod retaining nut to 60 Nm (44 ft. lbs.).
10. Install the wheel hub and bearing. Refer to Front Wheel Hub, Bearing, and Seal Replacement (RWD) (See: Suspension/Wheel Hub/Service and
Repair/Front Wheel Hub, Bearing, and Seal Replacement (RWD))Front Wheel Hub, Bearing, and Seal Replacement (4WD) (See:
Suspension/Wheel Hub/Service and Repair/Front Wheel Hub, Bearing, and Seal Replacement (4WD)).
11. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
12. Lower the vehicle.
13. Check the front wheel alignment. Refer to Wheel Alignment Specifications (See: Alignment/Specifications/Wheel Alignment Specifications).
