9-7X V8-5.3L (2005)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Front Shock Absorber Yoke Replacement
Front Shock Absorber Yoke Replacement
Special Tools
J 24319-B Steering Linkage and Tie Rod Puller
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
Important: The lower control arm must be supported so that the ball is not over extended.
3. Support the lower control arm with an appropriate jack stand.
4. Remove the shock module yoke to lower control arm mounting nut.
5. Using the J 24319-B, remove the shock module yoke from the lower control.
6. Remove the shock module yoke to shock absorber bolt and nut.
