9-7X V8-5.3L (2005)
7. Using a flat bladed tool, spread the shock module yoke at the bolt.
8. Remove the shock module yoke from the shock absorber.
Installation Procedure
Important: Ensure that the shock absorber is fully seated in the yoke.
1. Install the shock module yoke to the lower control arm stud and shock absorber.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
Important: The bolt that secures the shock absorber to the shock absorber yoke moves freely to ensure the proper alignment of the shock
absorber yoke to the lower control arm.
2. Install the shock module yoke to shock absorber bolt and nut.
Tighten the shock module yoke to shock absorber bolt to 70 Nm (52 ft. lbs.).
3. Install the shock module yoke to lower control arm mounting nut.
Tighten the shock module yoke to lower control arm mounting nut to 111 Nm (82 ft. lbs.).
4. Remove the jack stand from the lower control arm.
5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
6. Lower the vehicle.
Shock Absorber and Spring Assembly Replacement
