saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Front Wheel Hub, Bearing, and Seal Replacement (RWD)|Page 14753 > < Front Wheel Hub, Bearing, and Seal Replacement (RWD)|Page 14751
Page 2
background image

9. Remove the wheel hub and bearing to the steering knuckle mounting bolts.

10. Remove the wheel hub and bearing from the steering knuckle.
11. Remove the splash shield from the steering knuckle.

Installation Procedure

1. Install the splash shield to the steering knuckle. Align the splash shield to the steering knuckle threaded holes.
2. Install the wheel hub and bearing to the steering knuckle. Align the threaded holes.

Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).

3. Install the wheel hub and bearing to the steering knuckle mounting bolts.

Tighten the wheel hub and bearing mounting bolts to 105 Nm (77 ft. lbs.).

Front Wheel Hub, Bearing, and Seal Replacement (RWD)|Page 14753 > < Front Wheel Hub, Bearing, and Seal Replacement (RWD)|Page 14751