9-7X V8-6.0L (2008)
3.
Locate the two door trim reflector attaching tabs (1) on the back side of the door trim panel.
4.
Cut a piece of Kent(R), KT13487, BRS Tape, or equivalent flocking tape, to 35 mm (1-3/8 in) width by 60 mm (2-9/16 in) length.
5.
Install the flocking tape (1) over the two reflector tabs.
6.
Install the front side door trim panel. Refer to Front Side Door Trim Panel Replacement in SI.
7.
Verify that the condition has been corrected.
Parts Information
Warranty Information (excluding Saab U.S. Models)
For vehicles repaired under warranty, use the table above.
Warranty Information (Saab U.S. Models)
For vehicles repaired under warranty, us the table above.