9-7X V8-6.0L (2008)
Grille: All Technical Service Bulletins
Body - Front Fascia Grille Inserts Loose/Missing
TECHNICAL
Bulletin No.: 08-08-111-010
Date: November 12, 2008
Subject:
Front Fascia Grille Insert(s) Missing or Loose (Apply Adhesive)
Models:
2005 2009 Saab 9-7X
Condition
Some customers may comment that the front fascia grille insert or inserts are loose or missing.
Correction
1. Disengage the upper fascia to gain access to the grille.
2. Install a new grille and apply hot melt glue between the retaining tang and the grille insert.
NOTE:
The hot melt glue is being used to stop the retainer from moving into the release position, not as an adhesive to hold the insert in place.
Parts Information
Warranty Information (Saab Canada Models)
For vehicles repaired under warranty, use the table.
Warranty Information (Saab U.S. Models)
