9-7X V8-6.0L (2008)
8. Install the ECM/TCM cover.
9. Ensure the ECM/TCM cover retainers (1) are fully engaged to the ECM/TCM bracket.
10. Connect the cooling fan electrical connector.
11. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair).
12. If the ECM was replaced the replacement ECM must be programmed. Refer to Control Module References (See: Testing and
Inspection/Programming and Relearning/Control Module References).
