9-7X V8-6.0L (2008)
11. Use the following procedure if the vehicle is equipped with 4-wheel drive (4WD):
1. Remove the front propeller shaft. Refer to Front Propeller Shaft Replacement (See: Transmission and Drivetrain/Drive/Propeller Shafts,
Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Front Propeller Shaft Replacement).
2. Remove the transfer case. Refer to Transfer Case Assembly Replacement (See: Transmission and Drivetrain/Transfer Case/Service and
Repair/Removal and Replacement/NVG 120-NR9 - Transfer Case/Transfer Case Assembly Replacement).
3. Support the transmission with a suitable transmission jack.
4. Remove the transmission support. Refer to Transmission Support Replacement (See: Body and Frame/Frame/Cross-Member/Service and
Repair/Transmission Support Replacement).
5. Lower the transmission slightly.
6. Remove the EVAP/fuel hose/pipe assembly from the retaining clips (1) on the transmission.
12. Remove the EVAP/fuel hose/pipe bracket nut (5).
13. Remove the fuel hose/pipe bracket (6) from the bellhousing stud.