9-7X V8-6.0L (2008)
Notice: Refer to Handling Electrostatic Discharge Sensitive Parts Notice (See: Service Precautions/Vehicle Damage Warnings/Handling
Electrostatic Discharge Sensitive Parts Notice).
Important:
*
It is not necessary to disconnect the ECM electrical connectors in order to remove the ECM from the ECM/TCM bracket. Only
disconnect the electrical connectors if servicing of component requires disconnecting of the electrical connectors.
*
Remove any debris from around the ECM connector surfaces before servicing the ECM. Inspect the ECM module connector gaskets
when diagnosing or replacing the ECM. Ensure that the gaskets are installed correctly. The gaskets prevent contaminant intrusion
into the ECM.
6. Disconnect the engine wiring harness electrical connectors from the ECM.
7. Release the ECM/TCM bracket upper retainers (1).
8. Tilt the ECM away from the bracket and remove the ECM.
