9-7X V8-6.0L (2008)
Rain Sensor: Service and Repair
Windshield Outside Moisture Sensor Replacement
Removal Procedure
Important: The rain sensor retaining ring is permanently mounted to the windshield and is not serviceable. Damage to the windshield or
the retaining ring will occur if removed.
1. Disconnect the electrical connector from the rain sensor (1).
2. Carefully pull downward on sensor (1) to release it from the retaining ring (2).
Important: Do not touch the surface of the sensor when it is removed from the glass.
3. Remove the sensor from the vehicle.
Installation Procedure
1. Clean the mounting location on the windshield using a clean lint free cloth with isopropyl alcohol.
2. Install the rain sensor (1) to the windshield.
3. Connect the electrical connector to the rain sensor (1).
