9-7X V8-6.0L (2008)
Tighten the bolt to 9 Nm (80 in. lbs.).
12. Attach the wire harness to the wire harness retaining clips on the transmission oil cooler line bracket.
13. Install the rear steering gear crossmember. Refer to Rear Steering Gear Crossmember Replacement (See: Body and
Frame/Frame/Cross-Member/Service and Repair/Rear Steering Gear Crossmember Replacement).
14. Lower the vehicle.
15. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery Cable/Service and
Repair).