9-7X V8-6.0L (2008)
6. Disconnect the air supply lines (3) from the air spring compressor (1).
7. Remove the air spring compressor from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
Important:
*
Inspect the air supply lines for deep scores or cuts. If the air supply lines are damaged, the lines must be replaced.
*
Ensure the color on the air supply lines match the color on the air spring compressor for reassembly.
1. If no damage to the air supply pipes is evident, then remove the fittings from the new compressor and use existing fittings that are already attached
to air supply lines. Install the air supply lines with existing fittings to the air spring compressor.
Tighten the air supply line fittings to 2.25 Nm (20 in. lbs.).
2. If damage is evident to the air supply lines, then replace the air supply lines. Refer to Air Suspension Air Line Replacement (See: Air Line/Service
and Repair).
3. Connect the air spring compressor electrical connection (2).
4. Connect the air inflator switch electrical connection, air supply line, and air spring compressor vent hose to the air spring compressor.
5. Install the air spring compressor to the frame mounting bolts.
Tighten the bolts to 20 Nm (15 ft. lbs.).