9-7X V8-6.0L (2008)
4. Install the ABS sensor to the wheel hub and bearing.
5. Install the ABS sensor mounting bolt to the wheel hub and bearing.
Tighten the ABS sensor to the wheel hub and bearing mounting bolt to 18 Nm (13 ft. lbs.).
6. Install the brake rotor. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service
and Repair/Removal and Replacement/Front Brake Rotor Replacement).
7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
8. Lower the vehicle.
9. Install the drive axle nut and draw the hub and bearing onto the axle.
Tighten the drive axle nut to 140 Nm (103 ft. lbs.).
10. Install the tire and wheel center cap.
