9-7X V8-6.0L (2008)
1. Install the outer pinion bearing cup using the J 7817, 8.0 inch axle, or the J 8611-01, 8.6 inch axle (1), and the J 8092 (2).
2. Install the inner pinion bearing cup using the J 8608 (2) and the J 8092 (1).
3. Determine the selective shim thickness for the pinion. Refer to Pinion Depth Adjustment (See: Service and Repair/Removal and
Replacement/Rear Drive Axle/Pinion Depth Adjustment).
4. Install the selective shim between the inner pinion bearing and the shoulder on the gear.
5. Install the inner pinion bearing using the J 24433.
Press the bearing on until the cone seats on the pinion shim.
6. Install a new collapsible spacer.
7. Lubricate the pinion bearings with axle lubricant. Use the proper fluid. Refer to Fluid and Lubricant Recommendations (See: Specifications/Fluid
Type Specifications).
8. Install the pinion into the axle housing.
9. Install the outer pinion bearing onto the pinion.
