9-7X V8-6.0L (2008)
11. Once the specified torque is obtained, rotate the pinion several times to ensure the bearings have seated. Recheck the rotating torque and adjust if
necessary.
12. Install the rear steering gear crossmember. Refer to Rear Steering Gear Crossmember Replacement (See: Body and
Frame/Frame/Cross-Member/Service and Repair/Rear Steering Gear Crossmember Replacement).
13. Install the front propeller shaft. Refer to Front Propeller Shaft Replacement (See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair/Front Propeller Shaft Replacement).
14. Install the engine protection shield. Refer to Engine Protection Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and
Repair/Engine Protection Shield Replacement).
15. Fill the drive axle. Refer to Front Axle Lubricant Replacement (See: Fluid - Differential/Service and Repair/Removal and Replacement/Front
Drive Axle).
16. Lower the vehicle.