9-7X V8-6.0L (2008)
10. Remove the following items:
*
The spacer ring (1)
*
The spider assembly (2)
*
The second spacer ring (3)
*
The tripot boot (4)
11. Discard the tripot boot and spacer rings.
12. Clean the halfshaft bar. Use a wire brush to remove any rust in the boot mounting area grooves.
13. Inspect the following items:
*
The needle rollers
*
The needle bearings
*
The trunnion
14. Inspect the tripot housing for unusual wear, cracks, or other damage.
15. Use the appropriate kit to replace any damaged parts.
Assembly Procedure
