900 L4-1985cc 2.0L (1982)
Harmonic Balancer - Crankshaft Pulley: All Technical Service Bulletins
Campaign - Crankshaft Pulley Inspection/Replacement
FILE IN S.I. Man.
VOL. I
SEC. 2
PG. 179
Service Information
SUBJECT:
SERVICE CAMPAIGN ISSUE: 06/85-766
CRANKSHAFT PULLEY
SUPERSEDES: 12/84-725
#82-84 900 MODELS
Contents of this S.I.:
SERVICE CAMPAIGN
Introduction
p.1
Owner Notice
p.1
511
Parts Involved
p.2
Claim Information
p.2
Inspection Procedure
p.3
Introduction
This Service Campaign affects all 1982-84 Saab 900 models. Saab-Scania of America, Inc. will now accept claims for the replacement of separated
crankshaft pulleys for these vehicles even after the expiration of the regular new car warranty. Owners are eligible for pulley replacement at no charge
for parts and labor until June 30, 1987. Your dealership received a mailgram notice about this policy on May 16, 1985.
Owners are being advised of this (see text of Owner Notice) and that their car is to be inspected in conjunction with prescribed maintenance services.
Saab-Scania is not calling the affected vehicles in for inspection at this time and will not pay for an inspection of a vehicle brought in for a visual check
of the crankshaft pulley only. If the owner notices a metallic scraping noise from the engine compartment, a possible indicator that a failure is occurring,
the car should be brought in to the dealer immediately. There will be no initial order of parts for this campaign. Order parts as necessary from your Saab
parts depot.
Owner Notice
All owners of 1982-84 Saab 900 models will receive the notice pictured below during late June 1985.
Parts Involved
The following part numbers are involved in this Service Campaign but are only to be used if needed. An initial order of parts will not be sent to your
dealership. Please check your own stock for adequate pieces to perform repairs if needed.
P/N 93-13-313 Crankshaft Pulley M82-83
P/N 75-01-950 Crankshaft Pulley M84
The part numbers listed below may be damaged if extensive pulley separation has occurred. Again, please check your own stock levels.
P/N 93-08-842
Pump Housing w/Seal
M82-84