900 L4-1985cc 2.0L (1982)
^
Routing of the Sensor Wire -
-
Hoses and other engine components must be secured so that they do not come in contact with the knock sensor.
-
When tying the knock sensor wire to coolant hoses, always leave a little room for hose expansion.
An expanding cooling hose could impede the signal from the knock detector and could possibly damage the shielding of the wire.
-
The wire must not be tied to or allowed to come in contact with the intake manifold or the engine block.
-
Avoid sharp bends when routing the wire and do not allow it to pull tightly on any of its connections.
