900 L4-1985cc 2.0L (1982)
Fuel Pressure: Testing and Inspection
Pressure Test
Fig. 10 System pressure testing
1.
Disconnect control pressure line from fuel distributor.
2.
Connect pressure gauge between fuel distributor and control pressure regulator line, Fig. 10. On all models, the safety function is governed by a
pulse sensor in the pump relay which is activated by the ignition pluses.
3.
Disconnect fuel pump relay and connect a jumper wire across terminals 30 and 87 in relay holder.
4.
Bleed pressure gauge by repeated opening and closing of valve with the pressure gauge directed downward and fuel pump connected.
