900 L4-1985cc 2.0L DOHC (1986)
FIGURE 8 - PROTECTING THE CABLE GUIDES WITH DUCT TAPE.
Protecting the Cable Guides
1.
Push the top lining away from the Cpillar while sitting in the back seat.
2.
Fasten a length of duct tape over the cable guides. The tape should be 50 x 70 mm (2 in. x 3 in.) in size. (Figure 8)
3.
Repeat this procedure on the other side.
Replacing the Adjusting Screws to Adjust the Height of the Top Front Rail
NOTE:
As from VIN J7002533 the following adjustment has already been performed at the factory.
1.
With the top in the fully closed position, open the latch handles to release the tension on the top mechanism.
