900 L4-1985cc 2.0L DOHC (1986)
Oil Pump: Service and Repair
Oil pump
To remove
The oil pump can be removed with the engine in the car.
1 Clean the area round the oil pump.
2 Remove the crankshaft pulley centre-bolt and the pulley from the crankshaft. Immobilize the crankshaft by attaching locking segment 8392987 to
the flywheel ring gear.
3 Remove the oil pump retaining bolts and extract the pump.
To check
Use a straightedge and feeler gauge to check the end float between the pump body and the gearwheel.
Permissible end float: 0.03-0.08 mm (0.0012 - 0.0031 in)
To refit
