900 L4-1985cc 2.0L DOHC (1986)
Removing Timing Cover
5. Remove timing cover bolts and remove cover complete with water pump and hoses.
Install
1.
Refit timing cover with water pump. Tighten cover bolts to: 20 Nm (15 ft lb).
2.
Refit water pump pulley.
3.
Refit oil pump and crankshaft pulley. Be careful not to damage crankshaft oil seal when fitting oil pump. Tighten crankshaft bolt to: 190 Nm (140
ft lb).
4.
Refit valve cover. Tighten valve cover bolts to: 15 Nm (11 ft lb).
5.
Refit engine. See: Service and Repair.
