saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Campaign - Installing High Mounted Brake Light|Page 4968 > < Brake Light Switch|Locations
Page 1
background image

Center Mounted Brake Lamp: All Technical Service Bulletins
Campaign - Installing High Mounted Brake Light

FILE IN S.I. Man VOL. I

SEC. A-3   

PG. 96

Service Information

SUBJECT:

INSTALLING HIGH-MOUNTED BRAKE                     ISSUE: 03/86-832 LIGHTS ON EARLY 1986 900 MODELS

APPLICATION: EARLY M86 900, 900S. Turbo                       SERVICE CAMPAIGN

Contents of this S.I.

515

Introduction

p. 1

Cars Involved

p. 1

Parts Involved

p. 1

Warranty Information

p.2

Installation Instructions - Included in kits
Owner Letter

p. 3

Introduction

Saab-Scania was unable to incorporate the high-mounted brake light on 1986 Saab 900 models produced before September 1, 1986, the effective date of
a new Federal requirement for such a light. Customer interest in the high-mounted brake light has prompted this Service Campaign through which we are
offering to install a Saab brake light kit on early 1986 models at no charge.

Purchasers of affected vehicles will be notified of this offer via a letter which instructs them to contact their Saab dealer if interested. The owner letter is
attached to this S.I. Read this letter carefully.

Your dealership will receive an initial quantity of brake light kits proportional to the number of affected cars sold by your dealership. We expect to be
shipping initial supplies during the second week of April 1986.

Parts Involved

The following parts will be sent to your dealership in a quantity equaling 50% of those vehicles listed on your status list. Order any additional supplies as
needed.

Brake Light Kit

P/N 02-71-239

3 Dr Models

Brake Light Kit

P/N 02-71-247

2 Dr, 4 Dr Models

Cars Involved

All Saab 900 models built from the beginning of M86 production to the numbers given below:

G2000001-G2001588 G3000001-G3001403 G7000001-G7003092
Warranty Information

Use a regular warranty claim as in Saab Service Campaigns. Follow the claim instructions given below. No additional parts or time may appear on the
claim.

Failure Code:

35185-03-0-12-01 (Because of the nature of this program, please note that the coding varies from normal campaign numbering.)

Parts Allowance:

02-71-239     Brake Light Kit (3-door)

02-71-247

Brake Light Kit (2, 4-door)

Labor Allowance:

Install high-mounted brake light kit. Enter the following labor in the straight time area:

2 dr, 4 dr. -

0.8 hour

3 dr. -

0.4 hour

Installation Instructions

Instructions are included with each high-mounted brake light kit supplied by Saab. Please refer to them before and during the installation.

Campaign - Installing High Mounted Brake Light|Page 4968 > < Brake Light Switch|Locations