900 L4-1985cc 2.0L DOHC (1986)
Seat Belt: Technical Service Bulletins
Seat Belt Button - Replacing
Category
Body
Section
8
Page
107
Issue
04/95-0563
Code
853
Subject:
Replacing Seat Belt Button
Application:
All 900 and 9000 Models
In the past, if a button on a seat belt was broken, the only alternative you had was to replace the entire seat belt. In an attempt to reduce customer cost, a
seat belt button is now available as a spare part. Please follow the directions below to install/replace this item.
Note that on 1994 900's, certain types of child safety seats (generally those facing forward) may be difficult to secure firmly to the rear seat because the
lower seat belt button prevents the belt from being tightened. This can be remedied by moving the button lower down on the belt.
Cars Affected:
All 900 and 9000 models
Parts:
Male half seat belt button
96 17 846
Female half seat belt button
96 17 853
Action:
1.
Heat the seat belt button's protruding tip with a soldering iron and break the button apart.
2.
Broken button: note the position of the old button.