saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Recall - Steering U-Joint Clamp Bolt Replacement|Page 3932 > < Recall - Steering U-Joint Clamp Bolt Replacement
Page 2
background image

Bend the heater duct down and out of the way.

Turn the steering wheel as necessary to obtain easiest access to upper joint of steering column.

2.

Remove the 8 mm bolt and nut from the upper joint for the steering column.

Replace with the new bolt (P/N 79-67-789) and nut (P/N 79-68-415).

Torque to 19-25 ft.lbs. (25-34 N-m).

3.

Re-fit the heater duct.

CLAIM PROCEDURE

Claim Forms

Owner notification letters are being sent inside a pre-printed Saab recall claim form/mailer. The pre-printed Recall 266 form is to be submitted by the
dealer to the Saab-Scania of America Warranty Department. This is necessary for the payment of labor and to complete our recall records and update our
periodic recall reports to the National Highway Traffic Safety Administration (NHTSA). These records are subject to Federal (NHTSA) audit.

If the owner has lost the claim or it is otherwise unavailable or unusable, contact your Saab Regional Service Manager's office and request a new Recall
266 claim form. Be prepared to supply the VIN Serial No.

When the supply of forms pre-printed for Recall 266 are exhausted a blank recall claim form will be sent. Fill this form out according to the sample
pictured here. Recall repairs cannot be claimed on a regular warranty claim form.

Submitting Claims

The recall claim is a three part copy. Send the Factory copy (#1) to Saab-Scania of America. Keep the Parts copy (#2) with the parts and retain the
Dealer copy (#3) for your records.

Send Factory copy to:

Saab-Scania of America P.O. Box 697 Orange, CT. 06477

Attn:

Warranty Dept.

Submit the claim within 30 days of the repair date.

Labor Allowance

0.4 hour to replace and torque bolt in upper steering column U-joint.

Recall - Steering U-Joint Clamp Bolt Replacement|Page 3932 > < Recall - Steering U-Joint Clamp Bolt Replacement